Rocathaan | HS IND-RW136-1


Crack-bridging, watertight system based on aromatic polyurea Hotspray.

System Example 

  1. Check the surface for salts, remove if necessary and sandblast SA 2.5 and 80 microns
  2. A primer with anti-corrosion properties type: ProFast Primer RW (± 0.25 kg/m²/layer)
  3. Liner based on pure polyurea type: Rocathaan Hotspray PA 136-T (± 3 kg/m²/layer)

Most important properties

  1. Seamless
  2. Crack bridging
  3. Elastic
  4. Good chemical resistant
*Always check the suitability of the seal with regard to the medium being stored.

Application area’s

  1. Tank sealing on steel
  2. Steel water basins
Product use

Before applying this system, consult the relevant product and information sheets and, if necessary, contact your technical adviser.

The stated consumption figures are indicative and based on smooth, flat surfaces. The actual consumption depends on the method, roughness and suction of the substrate.

No rights can be derived from the information on this sheet